Advanced Slitting and Winding Solutions

Tidland › Winding › SuperChuck Retrofits

SuperChuck Retrofits

If you're looking for an alternative to your existing SuperChuck Safety Chucks, look no further. You can easily re-drill and tap your existing frame mount to accept Tidland System Boschert Safety Chucks or use an adapter plate that will bolt directly to the SuperChuck holes. Either way, you now have a solution. To get started, simply find your SuperChuck model in the following charts. Or, give us a call at (800) 426-1000 and we'll walk you through the process.

Specifications

Pedastal Mount Boschert Replacements for SuperChucks
SuperChuck Boschert Equivalent Typical
Square
Sizes
(inch)		 Max Load
(lb) @ 500 rpm

Maximum Torque
(ft-lbs)

 Notes
"A" Fly Weight 22-30 STO/STW 1.00
1.12
1.25		 1760 130 Adapter raises chuck
vertically 0.812"
"AH" Light Weight 30-40 STO/STW 1.25
1.50		 3530 250 Adapter raises chuck
vertically 1.12"   
"B" Middle Weight 30-40 STO/STW  1.25
1.50		 3530  250 
"B" Middle Weight  40-50 STO/STW 1.75 6170  800 
"BH" Heavy Weight  40-50 STO/STW  1.75 6170   800 

 

Flange Mount Boschert Replacements for SuperChucks
SuperChuck Boschert Equivalent Typical
Square
Sizes
(inch)		 Max Load
(lb) @ 500 rpm

Maximum Torque
(ft-lbs)

 Notes
"AF" Fly Weight 22-30 FLO/FLW 1.00
1.12
1.25		 1760 130 Air shaft must be shortened
by 1.904" - each end
"AHF" Light Weight 30-40 FLO/FLW 1.25
1.50		 3530 250 Air shaft must be shortened
by 1.906" - each end
"BF" Middle Weight  30-40 FLO/FLW   1.25
1.50 		 3530  250  Air shaft must be shortened
by 1.687" - each end 
"BF" Middle Weight  40-50 FLO/FLW 1.75  6170  800  Air shaft must be shortened
by 2.868" - each end 
"BHF" Heavy Weight  40-50 FLO/FLW  1.75  6170   800  Air shaft must be shortened
by 1.993" - each end 

Documents

Can't Find Something?

Try searching above or
e-mail us

Related Products & Packages

Categories:

Products: