Tidland DMS Digital Measurement System

• 

Tidland’s affordable Digital Measurement System is an extremely accurate and reliable method of measuring slitter knife positions. This easy to use system reduces operator error and greatly speeds up re-positioning times. For slit widths 508 mm (20 inches) and longer, accuracy is within ± 0.18 mm (0.007 inch), and for slit widths under 20 inches (508 mm), accuracy increases to ± 0.10 mm (0.004 inch) or better.
The Digital Measurement System is simple to install, requiring standard 110V power plus 80 psi (5.5 bar) minimum filtered air supply. It permanently mounts between existing machine frames using two end-mounting blocks supplied with the unit. And the electronic display can be mounted at any position on the machine.

Key Features

Accurate knife positioning reduces setup time and eliminates operator error
Location sensor is unaffected by dust or debris
Easy to retrofit, requires only a few tools to install
Intuitive controls are simple to operate

Specifications

Positioning Accuracy	Input Supply
Slit Widths ≥ 508 mm (20 inches) +/- 0.18 mm (0.007 inch)	Power: 110 Volt Standard
Slit Widths < 508 mm (20 inches) +/- 0.10 mm (0.004 inch)	Air: 5.5 bar (80 psi) filtered, minimum

Documents

Product Video